You have arrived on the English website.

Range "STD"

Our product offer

STD stainless steel tank

Domestic hot water production tanks (ACS)

The STD tank produces domestic hot water with an integrated exchanger.
We offer two types of design :

The STD steel tank

The STD is a hot water production tank with an internal exchanger with a thin layer of water. It was designed to heat water from 10 to 60 ° C in 40 minutes (primary regime 90/70 °C).
The pressure drops are almost zero, which allows it to operate in thermosyphon: vertical or horizontal position.
Single-phase or three-phase shielded electrical equipment can be screwed on later.
Its flexible jacket with a thickness of 20 mm ensures thermal insulation (λ = 0.03 kcal / mh ° C).
It can also be placed on a base.

STD's are available in two coating versions.

CILIPLAST
Constituted by a cement milk, in which plastic fillers and various mineral additives are embedded intended to reinforce the effectiveness of the coating.
The latter is the most widely used, it corresponds to approximately 9/10 of conventional uses and is perfectly suited to waters included in the range of DTU-60-1 (additive 4).

In the presence of slightly salted water, too aggressive, an improperly adjusted softener, too hot water> 65 °C, this can be detrimental to the staying power of the coating. It may be helpful to choose a different coating.

CILIROC

Constituted by a food coating on hot galvanization, it was studied for certain particular or difficult cases. In addition, due to hot galvanizing, the inside of the exchanger is protected.
These tanks are guaranteed for 3 years from the date of invoice from the wholesaler to his client. The electrical equipment is guaranteed for 1 year.

These two ranges can be delivered with dust jacket and wall console fitted at the factory.
Save time on a construction site and the tank remains clean until it is installed.

The STD steel tank

STD HAWAII CILIPLAST / CILIROC

The STD stainless steel tank

Made of quality stainless steel 316 liters, these tanks are interchangeable with conventional STD tanks. They have been designed to respond more particularly to difficult uses (aggressive water, electrolysis problem ...).

Obligation to set up an accelerator. Vertical position only.

The STD stainless steel is a hot water production tank with a tubular interior exchanger (coil type). It has been designed to heat water from 10 to 60 ° C in 40 minutes (primary regime 90/70) in a vertical position. Single-phase or three-phase shielded electrical equipment can be screwed on later.
Its flexible jacket with a thickness of 20 mm ensures thermal insulation (λ = 0.03 kcal / mh ° C).
It can also be placed on a base.

It can be supplied with dust jacket and wall console fitted at the factory.
Save time on a construction site and the tank remains clean until it is installed.

The STD INOX tank

STD Hawaï inox

STD tanks can also be very suitable for solar installations.
In this case, it is strongly advised to make an electrical backup by taking optional electrical equipment.

STD HAWAÏ INOX

Technical characteristics

  • Plaquette STD (pdf, 1.15 MB)
  • Dimensions - schéma de principe (pdf, 190.06 KB)
  • Accessoires (pdf, 741.52 KB)
Do you have a similar project ?
Let's get in touch !