You have arrived on the English website.

Hydropan

Our product offer

Painted vessels with 4 and 10 bar membrane

Manufactured in accordance with the European directive

- DESP 2014/68 / UE (former DESP 97/23 / CE)
- steel tank, Epoxy paint
- plasto-elastic butyl membrane
- drinking water quality with ACS (Health Compliance Certificate)

Membrane vessels are guaranteed for 2 years. The membranes are guaranteed for 1 year.

Attention : adjust the pre-inflation pressure at the valve according to the pump cut-in pressure (low pressure set at the pressure switch). The pre-inflation pressure must be approximately 0.3 bar below the start-up pressure. For example, for a starting pressure of 2 bars, set the pre-inflation pressure to around 1.7 bars.

The pre-inflation pressure should be checked every 2 months and it is strongly recommended to empty the bladder at least once a year.

Informations Produits

  • Plaquette Hydropan (pdf, 276.13 KB)
  • Mise en service (pdf, 216.35 KB)
  • Accessoires (pdf, 781.04 KB)

"Hydropan" - Galvanized connection

"HYDROPAN" Vt. - Maximum admissible pressure: PS = 10Bar

  • Dimensions 50 à 500 litres - 10 bars - Vt - Galva (pdf, 1.74 MB)

"HYDROPAN" Hz. - Pression maxi admissible : PS=10Bar

  • Dimensions 20 à 100 litres - 10 bars - Hz - Galva (pdf, 801.71 KB)

"Hydropan" - Stainless steel connection

"HYDROPAN" Vt. - Maximum admissible pressure: PS = 4Bar

  • Dimensions 50 à 500 litres - 4 bars - Vt - Inox (pdf, 1.74 MB)

"HYDROPAN" Vt. - Maximum admissible pressure: PS = 10Bar

  • Dimensions 50 à 500 litres - 10 bars - Vt - Inox (pdf, 1.74 MB)

"HYDROPAN" Hz. - Maximum admissible pressure: PS = 10Bar

  • Dimensions 20 à 100 litres - 10 bars - Hz - Inox (pdf, 800.99 KB)
Do you have a similar project ?
Let's get in touch !